1. Before use, check whether each device of the ice maker is normal, such as whether the water supply device is normal, and whether the water storage capacity of the water tank is normal. Generally speaking, the water storage capacity of the water tank has been set at the factory.
2. After confirming that everything is normal, put the ice maker in a stable place, and insert the prepared bottled water into the water inlet of the ice maker. At this time, the water will automatically enter the water tank of the ice cube maker.
3. After plugging in the power supply of the upper ice machine, the ice cube machine starts to work, and the water pump starts to pump the water in the water tank into the ice making area. At the beginning, the water pump has an exhaust process. After the air is discharged, the compressor starts to work, and the cube ice machine starts to work. Start making ice.
4. When the ice starts to fall, flip the ice-falling baffle and turn on the magnetic reed switch. When the ice reaches a certain amount, the reed switch will be closed again, and the ice maker will enter the ice-making state again.
5. When the ice storage bucket of the ice maker is full of ice, the reed switch will not be closed automatically, the ice maker will automatically stop working, and the ice making is completed. If the power switch of the ice cube machine is turned off, unplug the power supply of the cube ice machine. line, the ice cube machine is complete.
Precautions for using the ice cube machine:
1. Regularly check the inlet and outlet water pipe joints, and deal with a small amount of residual water that may leak.
2. When the ambient temperature drops below 0, there is a possibility of freezing. It must be drained to drain the water, otherwise the water inlet pipe may be broken.
3. Drains should be checked once or twice a year to prevent blockages.
Post time: Dec-01-2022